LOW PRESSURE HOT STABS
Low pressure hot stabs for suction cans
Subseadesign’s series of 3” low pressure stabs and receptacles are developed to allow pumping and suction of water in / out of suction cans during installation / removal.
SubseaDesign`s 3-inch low pressure hot stab assembly is typically used as suction and pumping tool for suction piles. The handle can swivel and is equipped with a fishtail for easy access and mechanical operation by ROV.
Height | 496 mm |
Width | 403 mm |
Weight | 18.2 kg (dry) |
Max. water depth | no limit |
Material stab (seals) | SuperDuplex (HPU/NBR) |
Material fishtail & rod | SuperDuplex |
Document | Download link |
---|---|
Product datasheet | click here |
SubseaDesign`s 3-inch dummy hot stab will seal the receptacle within the system for use in subsea operations or testing. The dummy stab is equipped with a fishtail for easy access and mechanical operations by ROV. Fishtail is painted orange for ROV visibility.
Height | 672 mm |
Width | 250 mm |
Weight | 8.5 kg |
Max. water depth | no limit |
Material bolts & nuts | Stainless steel (A4-80) |
Material fishtail & rod | SuperDuplex |
Document | Download link |
---|---|
Product datasheet | click here |
SubseaDesign`s 3-inch suction port is prepared with a Ø88.9 outlet for welding to the suction pipe. The groove for the handle makes it easy to remove and insert the stab
Height | 350 mm |
Width | 220 mm |
Weight | 28 kg |
Max. water depth | no limit |
Material | SuperDuplex * |
* other materials also available
Document | Download link |
---|---|
Product datasheet | click here |
SubseaDesign`s 3-inch receptacle is utilized for storing one dummy hot stab whilst the live hot stab is being used in the live receptacle. The groove for the handle makes it easy to remove and insert the stab.
Height | 350 mm |
Width | 220 mm |
Weight | 31 kg |
Max. water depth | no limit |
Material | SuperDuplex * |
* other materials also available
Document | Download link |
---|---|
Product datasheet | click here |