MISALIGNMENT CONNECTOR ELIMINATING TIE-IN MOMENT
SeAlign is the first and only ROV operated connector in the market providing misalignment capability. In addition, it combines robustness and a sealing system that is not affected by external loads.
The SeAlign connector can be supplied as diver flanges with swivelling clamp rings and stud bolts, or ROV operated connectors with 3-segmented, single drive screw clamps and complete vertical or horizontal tie-in systems
The current size range covers 6″ to 20″, with custom sizes available on request.
The main features include:
- Up to +/- 3˚ hub misalignment
- Acts as ball joint – locked at make-up
- Eliminates tie-in bending moment, only axial load required
- Mechanical end stop in hub profile
- Leak tight at all misalignment angles, M2M
- Design pressure and depth rating to suit most applications
![](https://subseadesignas-1a14b.kxcdn.com/wp-content/uploads/2022/05/SubseaDesign-12inSealign-ROV-Cutview-1.webp)
Metal Seal
Female Hub
Male Hub
Drive screw
Trunnion
Hinge Bolt
Clamp Segment
The benefits of SeAlign may be realized by one or more of the below:
- Reduced spool size
- Relaxed fabrication tolerances
- Reduced operational loads
![](https://subseadesignas-1a14b.kxcdn.com/wp-content/uploads/2024/04/Movie-thumb-768x432.webp)
Play Video
From workshop testing
![](https://subseadesignas-1a14b.kxcdn.com/wp-content/uploads/2024/04/SeAlign-diverless-misalignment-connection-system-workshop.webp)
STAGE 1 : Before landing
STAGE 2 : Landed
STAGE 3 : Hub in position
STAGE 4 : Clamp Cosed